Tso NTERNATIONAL STANDARD 1049 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION MEKIyHAPOIHAN OPrAHW3AW TIO CTAHIAPTW3AIWW.ORGANISATION INTERNATIONALE DE NORMALISATION Continuous mechanical handling equipment for loose bulk materials -- Vibrating conveyors and feeders with rectangular or trapezoidal trough Engins de manutention continue pour produits en vrac - Distributeurs et transporteurs vibrants a auges rectangulaires ou trapezoidales First edition - 1975-11-01 ANS1 1nternat Doc Soct 0uT161975 130 1U49-19/5 (E) UDC 621.867.5 Ref. No. ISO 1049-1975 (E) Descriptors : handling equipment, continuous handling, conveyors, bulk products, oscillating conveyors, mechanical feeders, specifications, dimensions. Price based on 2 pages Copyright InternationalOrganizationfor Standardization Not for Resale FOREWORD Iso (the International Organization for Standardization) is a woridwide federation of nationai standards institutes (ISO Member Bodies). The work of developing International Standards is carried out through ISO Technical Committees. Every Member Body interested in a subject for which a Technical Committee has been set up has the right to be represented on that Committee. International organizations, governmentat and non-governmental, in liaison with IsO, also take part in the work. Draft International Standards adopted by the Technical Committees are circulated to the Member Bodies for approval before their acceptance as International Standards by the ISO Council. Prior to 1972, the results of the work of the Technical Committees were published as IsO Recommendations; these documents are now in the process of being transformed into International Standards. As part of this process, Technical Committee IS0/TC 101 has reviewed ISO Recommendation R 1049 and found it technically suitable for transformation. International Standard ISO 1049 therefore ISO Recommendation R 1049 was approved by the Member Bodies of the following countries : Germany Belgium Sweden Brazil Greece Switzerland Canada India Turkey Israel United Kingdom Chile Czechoslovakia Italy U.S.S.R. Yugoslavia Egypt, Arab Rep. of Japan Netherlands Finland France South Africa, Rep. of Body of the following country expressed disapproval of the The Member Recommendation on technical grounds : U.S.A. No Member Body disapproved the transformation of ISO/R 1049 into an International Standard. @ International Organization for Standardization, 1975 Printed in Switzerland Copyright International Organization for Standardization e from IHS Notfor Resa ISO 1049-1975 (E) INTERNATIONAL STANDARD Continuous mechanical handling equipment for loose bulk materials -- Vibrating conveyors and feeders with rectangular or trapezoidal trough 1SCOPE This Internationai Standard specifies the basic characteristics of vibrating conveyors and feeders with rectangular or trapezoi- dal trough. 2 FIELD OF APPLICATION This International Standard applies to vibrating conveyors and feeders, with rectangular (see figures 1 and 3) or trapezoidal (see figures 2 and 4) trough; flat-bottom (see figures 1 and 2) or dished-bottom (see figures 3 and 4) trough. FIGURE 15 FIGURE 3 -- Rectangular dished-bottom trough FIGURE 4 Trapezoidal dished-bottom trough FIGURE 5 - Length of trough Copyright International Organization for Standardization from IHS Not for Resale