ISO INTERNATIONAL STANDARD 15010 First edition 1998-06-15 Disposable hanging devices for transfusion and infusion bottles Requirements and test methods Dispositifs de suspension a usage unique pour flacons de transfusion et de perfusionExigences et méthodes d'essai ISO Referencenumber ISO 15010:1998(E) IHSunder Not for Resale ISO15010:1998(E) Foreword IsO (the International Organization for Standardization) is a worldwide preparing International Standards is normally carried out through isO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non- governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 15010 was prepared by Technical Committee ISO/TC 76, Transfusion, infusion and injection equipment for medical use. @ISO1998 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced and microfilm, without permission in writing from the publisher. International OrganizationforStandardization Case postale 56 . CH-1211 Geneve 20 · Switzerland Internet [email protected] Printed in Switzerland se from IHS Not for Resale @ ISO ISO15010:1998(E) Introduction This International Standard deals with hanging devices for transfusion bottles in accordance with isO 1135-1 and infusion bottles in accordance with ISO 8536-1. The intended purpose of hanging devices is to avoid drop- downs of transfusion and infusion bottles during administering of blood or pharmaceutical solutions. aaza ili etworking permited without license from IHS Not for Resale